Thirty minutes of pain – well worth it
At A Glance Author der_narr Contact der_narr@bme.anon IAM der_narr When It just happened Artist I myself Studio at home Location Duisburg/Germany
Dear reader, in this experience I will mainly talk about my latest stretch of my Ampallang, in which I stepped up from 3,2mm to 4mm, which in gauge is going from an 8 gauge to 6 gauge. But to make it easier for you, I will give a brief introduction in which I will tell you how I got my Ampallang pierced at 10g in March 2004 and this summer stretched it to 8g.
So here we go:
I decided to finally pierce my Ampallang in March 2004, shortly after coming together with my ex-girlfriend. So I went to Andrea @ Deep Metal Piercing in Dortmund/Germany and had my piercing done. You can read about this procedure here on bme as well. That procedure was done at 10g, and although my first barbell was made of titanium, I soon changed to a steel barbell as the barbell I had received first was some millimetres too short which caused bad pain during erections.
Then like 5 months after the actual piercing, my sex-life had come back to a normal level, but due to the thickness (or maybe thin-ness) of the 10g barbell, longer nights caused some trouble, so I decided to stretch my Ampallang to 8g at that time. After ordering my barbell from the internet and having it at home, I went to Wildcat in Essen/Germany and bought my 8g taper so stretch really smoothly.
So back at home, I cleaned my table, disinfected the jewellery and my taper, put off my pants and went to work. So firs I unscrewed the beads from my 10g barbell, then cleaned the piercing, lubed up the taper and started pushing the taper in. This was rather unpleasant, but it went really fine and after some minutes, the taper was all the way through, so I could follow it after with the new barbell and I was done for the evening. Healing was no problem at all.
Now we will turn to the latest (and hopefully final) stretch my penis witnessed: So my Ampallang was at 8g for like 3 months now, and I had decided to go up to 4mm as my final goal. So when I had finally aid back some money for the jewellery, I went to my online-shop for my new barbell and ordered it there. As it had to be specially made for me, it took them some days for production and delivery, but soon I held it in my own hands. The next step was to organise a taper for the procedure. But as all attempts failed, I bought my own taper again and so had all my tools ready.
While I'm writing this, the procedure of stretching is just two hours behind me – just mentioning it as a fact for those who care.
So again I cleaned everything off my table which was not absolutely necessary, then disinfected my table with Softasept®. Both the barbell and the taper were still in their sterile packs, so I opened those packages and laid them out in front of me.
Now I was ready to go. I turned my heating to full power,a s I was expecting to sit in my room without pants for a good while – damn was I right! I then undressed and removed my barbell.
This was at about 7:00PM. I then lubed up my new taper and slowly slid it into my Penis from the right side until I could feel some resistance. Now I put an O-ring onto the tapers other end, which had come out at the left side of my glans. I let it rest there for some minutes to get used to the pressure I could feel on the right side, then moved the taper in for some more millimetres. This caused an intense and really sharp stinging pain! But I knew I wantetd to get through with this procedure, so I didn't care tat much and continued with what I had just begun. It took me more than 30 minutes until I had achieved a little bit more than 4mm on the right side, but the left side was not yet big enough.
But as I didn't want to destroy any skin unnecessarily, I took the taper out , pushing it back to the right side. The I slowly tried, if the new 6 gauge barbell would fit into the hole – and it did fit... the first 2,5cm went in smoothly, but the I came to the spot where the stretch hadn't gone big enough, so it caused me some pain again. I breathed in, concentrated and slowly but constantly kept on pushing the barbell through my head... After one short moment of VERY intense pain, I was done. I could not believe what I had just done and my hands started shaking. So I laid back and rested for a moment.
Then, after like 5 minutes I attached the second bead to the left side, put some Octenisept® on my glans and dressed up again – damn was I lucky!
Now it is 10:00PM, so from the beginning of my stretch until now, it has taken me approximately three hours.
For anybody who has questions regarding my ampallang – you are invited to ask whatever you like.
Thanks you all for reading!
Alex